Architectural Metal Fence Systems
Designation | Title |
F2408 - 11 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
F2453 / F2453M - 05(2011)e1 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes |
F2589 - 11 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
F2919 / F2919M - 12 | Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels |
Bars
Designation | Title |
A29 / A29M - 12 | Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for |
A108 - 07 | Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished |
A125 - 96(2007) | Standard Specification for Steel Springs, Helical, Heat-Treated |
A255 - 10 | Standard Test Methods for Determining Hardenability of Steel |
A304 - 11 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements |
A311 / A311M - 04(2010) | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements |
A322 - 07 | Standard Specification for Steel Bars, Alloy, Standard Grades |
A355 - 89(2012) | Standard Specification for Steel Bars, Alloys, for Nitriding |
A400 - 69(2012) | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties |
A434 - 06(2012) | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered |
A499 - 89(2008) | Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails |
A575 - 96(2007) | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades |
A576 - 90b(2012) | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality |
A663 / A663M - 12 | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
A675 / A675M - 03(2009) | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
A689 - 97(2007)e1 | Standard Specification for Carbon and Alloy Steel Bars for Springs |
A696 - 90a(2012) | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
A702 - 89(2006) | Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought |
A739 - 90a(2012) | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
A914 / A914M - 92(2011) | Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
A920 / A920M - 07 | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties |
A921 / A921M - 93(2011) | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |
A1040 - 10 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels |
A1075 - 12 | Standard Specification for Flanged Steel U-Channel Posts |
E618 - 07 | Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine |
Bearing Steels
Designation | Title |
A295 / A295M - 09 | Standard Specification for High-Carbon Anti-Friction Bearing Steel |
A485 - 09 | Standard Specification for High Hardenability Antifriction Bearing Steel |
A534 - 09 | Standard Specification for Carburizing Steels for Anti-Friction Bearings |
A756 - 09 | Standard Specification for Stainless Anti-Friction Bearing Steel |
A866 - 09 | Standard Specification for Medium Carbon Anti-Friction Bearing Steel |
A892 - 09 | Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels |
E588 - 03(2009) | Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method |
Carbon Steel Tubular Products
Designation | Title |
A53 / A53M - 12 | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
A106 / A106M - 11 | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service |
A134 - 96(2005) | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) |
A135 / A135M - 09 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
A139 / A139M - 04(2010) | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
A178 / A178M - 02(2007) | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
A179 / A179M - 90a(2005) | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
A192 / A192M - 02(2007) | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
A210 / A210M - 02(2007) | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
A214 / A214M - 96(2005) | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
A252 - 10 | Standard Specification for Welded and Seamless Steel Pipe Piles |
A254 - 97(2007) | Standard Specification for Copper-Brazed Steel Tubing |
A381 - 96(2005) | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems |
A423 / A423M - 09 | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
A450 / A450M - 10 | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes |
A498 - 06 | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
A500 / A500M - 10a | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
A501 - 07 | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
A512 - 06 | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
A513 / A513M - 12 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
A519 - 06 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
A523 - 96(2005) | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
A524 - 96(2005) | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
A530 / A530M - 12 | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
A556 / A556M - 96(2005) | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
A587 - 96(2005) | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry |
A589 / A589M - 06 | Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe |
A595 / A595M - 11 | Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use |
A618 / A618M - 04(2010) | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
A671 / A671M - 10 | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
A672 / A672M - 09 | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
A691 / A691M - 09 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
A714 - 99(2009)e1 | Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
A733 - 03(2009)e1 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
A787 / A787M - 09 | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
A795 / A795M - 08 | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
A822 / A822M - 04(2010) | Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service |
A847 / A847M - 11 | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
A865 / A865M - 06 | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
A972 / A972M - 00(2010) | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles |
A984 / A984M - 03(2009) | Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded |
A1005 / A1005M - 00(2010) | Standard Specification for Steel Line Pipe, Black, Plain End, Longitudinal and Helical Seam, Double Submerged-Arc Welded |
A1006 / A1006M - 00(2010) | Standard Specification for Steel Line Pipe, Black, Plain End, Laser Beam Welded |
A1020 / A1020M - 02(2007) | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications |
A1024 / A1024M - 02(2007) | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless |
A1037 / A1037M - 05 | Standard Specification for Steel Line Pipe, Black, Furnace-butt-Welded |
A1065 / A1065M - 09 | Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point |
A1076 / A1076M - 12 | Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel |
Castings
Designation | Title |
A27 / A27M - 10 | Standard Specification for Steel Castings, Carbon, for General Application |
A99 - 03(2009) | Standard Specification for Ferromanganese |
A100 - 07(2012) | Standard Specification for Ferrosilicon |
A101 - 04(2009) | Standard Specification for Ferrochromium |
A102 - 04(2009) | Standard Specification for Ferrovanadium |
A128 / A128M - 93(2012) | Standard Specification for Steel Castings, Austenitic Manganese |
A132 - 04(2009) | Standard Specification for Ferromolybdenum |
A144 - 04(2009) | Specification for Ferrotungsten |
A146 - 04(2009) | Standard Specification for Molybdenum Oxide Products |
A148 / A148M - 08 | Standard Specification for Steel Castings, High Strength, for Structural Purposes |
A216 / A216M - 08 | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service |
A217 / A217M - 11 | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
A297 / A297M - 10 | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application |
A323 - 05(2010) | Standard Specification for Ferroboron |
A324 - 08 | Standard Specification for Ferrotitanium |
A351 / A351M - 12a | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts |
A352 / A352M - 06(2012) | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service |
A356 / A356M - 11 | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines |
A389 / A389M - 10 | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service |
A426 / A426M - 11a | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service |
A447 / A447M - 11 | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service |
A451 / A451M - 06(2010) | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service |
A481 - 05(2010) | Standard Specification for Chromium Metal |
A482 / A482M - 11 | Standard Specification for Ferrochrome-Silicon |
A483 / A483M - 10 | Standard Specification for Silicomanganese |
A487 / A487M - 93(2012) | Standard Specification for Steel Castings Suitable for Pressure Service |
A488 / A488M - 10 | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
A494 / A494M - 09e1 | Standard Specification for Castings, Nickel and Nickel Alloy |
A495 - 06(2010) | Standard Specification for Calcium-Silicon Alloys |
A550 - 06(2010) | Standard Specification for Ferrocolumbium |
A560 / A560M - 11 | Standard Specification for Castings, Chromium-Nickel Alloy |
A601 / A601M - 10 | Standard Specification for Electrolytic Manganese Metal |
A608 / A608M - 12 | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures |
A609 / A609M - 12 | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof |
A610 - 79(2009) | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size |
A636 - 08 | Standard Specification for Nickel Oxide Sinter |
A660 / A660M - 11 | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
A701 / A701M - 10 | Standard Specification for Ferromanganese-Silicon |
A703 / A703M - 12a | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
A732 / A732M - 09 | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
A743 / A743M - 06(2010) | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application |
A744 / A744M - 10e1 | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
A747 / A747M - 12 | Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
A757 / A757M - 10 | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
A781 / A781M - 12a | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
A799 / A799M - 10 | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content |
A800 / A800M - 10 | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof |
A802 / A802M - 95(2010)e1 | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
A835 / A835M - 10 | Standard Specification for Sizes of Ferroalloys and Alloy Additives |
A872 / A872M - 07a(2012) | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
A890 / A890M - 12 | Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application |
A903 / A903M - 99(2012) | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection |
A915 / A915M - 08 | Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades |
A922 - 05(2010) | Standard Specification for Silicon Metal |
A957 / A957M - 12a | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use |
A958 / A958M - 10 | Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades |
A985 / A985M - 12a | Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts |
A990 - 11 | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service |
A995 / A995M - 12 | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts |
A997 - 08 | Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination |
A1001 - 01(2010) | Standard Specification for High Strength Steel Castings in Heavy Sections |
A1002 - 10 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
A1025 / A1025M - 10 | Standard Specification for Ferroalloys, General Requirements |
A1062 - 10 | Standard Specification for Steel Castings Sampling |
A1067 / A1067M - 12 | Standard Specification for Test Coupons for Steel Castings |
A1080 - 12 | Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings |
Chain Link Fence and Wire Accessories
Designation | Title |
A392 - 11a | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
A491 - 11 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
A824 - 01(2012) | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
F552 - 02(2008) | Standard Terminology Relating to Chain Link Fencing |
F567 - 11a | Standard Practice for Installation of Chain-Link Fence |
F626 - 08 | Standard Specification for Fence Fittings |
F654 - 07(2012) | Standard Specification for Residential Chain Link Fence Gates |
F668 - 11 | Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric |
F900 - 11 | Standard Specification for Industrial and Commercial Swing Gates |
F934 - 96(2008) | Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials |
F1043 - 11a | Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework |
F1083 - 10 | Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures |
F1183 - 96(2011) | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
F1184 - 05(2010) | Standard Specification for Industrial and Commercial Horizontal Slide Gates |
F1345 - 10a | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
F1379 - 95(2008) | Standard Terminology Relating to Barbed Tape |
F1553 - 11 | Standard Guide for Specifying Chain Link Fence |
F1664 - 08 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence |
F1665 - 08 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
F1910 - 98(2008) | Standard Specification for Long Barbed Tape Obstacles |
F1911 - 05(2010) | Standard Practice for Installation of Barbed Tape |
Computer Applications
Designation | Title |
F1716 - 96(2008) | Standard Guide for Transition and Performance of Marine Software Systems Maintenance |
F1756 - 97a(2008) | Standard Guide for Implementation of a Fleet Management System Network |
F1757 - 96(2008) | Standard Guide for Digital Communication Protocols for Computerized Systems |
F2001 - 01(2006) | Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record |
F2017 - 00(2006) | Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration |
F2218 - 02(2008) | Standard Guide for Hardware Implementation for Computerized Systems |
F2446 - 04(2010) | Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange |
Corrugated Steel Pipe Specifications
Designation | Title |
A742 / A742M - 03(2008) | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
A760 / A760M - 10 | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
A761 / A761M - 04(2009) | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches |
A762 / A762M - 08 | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
A796 / A796M - 10 | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
A798 / A798M - 07 | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
A807 / A807M - 02(2008) | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
A849 - 10 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
A862 / A862M - 98(2008) | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe |
A926 - 03(2008) | Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe |
A930 - 09 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits |
A964 / A964M - 03(2011) | Standard Specification for Corrugated Steel Box Culverts |
A978 / A978M - 08 | Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications |
A979 / A979M - 03(2009) | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field |
A998 / A998M - 12 | Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications |
A1042 / A1042M - 04(2009) | Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains |
Editorial
Designation | Title |
A994 - 11 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys |
E527 - 07 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
Editorial and Terminology
Designation | Title |
A902 - 12 | Standard Terminology Relating to Metallic Coated Steel Products |
Electrical
Designation | Title |
F1003 - 02(2007) | Standard Specification for Searchlights on Motor Lifeboats |
F1014 - 02(2007) | Standard Specification for Flashlights on Vessels |
F1134 - 94(2007) | Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
F1198 - 92(2007) | Standard Guide for Shipboard Fire Detection Systems |
F1207M - 96(2007) | Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric] |
F1507 - 99(2011) | Standard Specification for Surge Suppressors for Shipboard Use |
F1669M - 96(2007) | Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric] |
F1755M - 96(2007) | Standard Specification for Solid State Bargraph Meters for Shipboard Use [Metric] |
F1835 - 97(2012)e1 | Standard Guide for Cable Splicing Installations |
F1836M - 09 | Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric) |
F1837M - 97(2012)e1 | Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
F1883 - 03(2008) | Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
F2044 - 09 | Standard Specification for Liquid Level Indicating Equipment, Electrical |
F2045 - 00(2011) | Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic |
F2046 - 00(2011) | Standard Specification for Tachometers, Various |
F2070 - 00(2011) | Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic |
F2071 - 00(2011) | Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic |
F2361 - 03(2009) | Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower |
F2362 - 03(2009) | Standard Specification for Temperature Monitoring Equipment |
Flat-Rolled and Wrought Stainless Steel
Designation | Title |
A167 - 99(2009) | Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
A176 - 99(2009) | Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip |
A240 / A240M - 12 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A276 - 10 | Standard Specification for Stainless Steel Bars and Shapes |
A313 / A313M - 10e1 | Standard Specification for Stainless Steel Spring Wire |
A314 - 08 | Standard Specification for Stainless Steel Billets and Bars for Forging |
A368 - 95a(2009) | Standard Specification for Stainless Steel Wire Strand |
A473 - 01(2009) | Standard Specification for Stainless Steel Forgings |
A478 - 97(2008) | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
A479 / A479M - 11 | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A480 / A480M - 12 | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A484 / A484M - 11 | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings |
A492 - 95(2009) | Standard Specification for Stainless Steel Rope Wire |
A493 - 09 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
A555 / A555M - 05(2009) | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
A564 / A564M - 10 | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A565 / A565M - 10 | Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service |
A580 / A580M - 12a | Standard Specification for Stainless Steel Wire |
A581 / A581M - 95b(2009) | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods |
A582 / A582M - 12e1 | Standard Specification for Free-Machining Stainless Steel Bars |
A638 / A638M - 10 | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service |
A666 - 10 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
A693 - 06 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A705 / A705M - 95(2009) | Standard Specification for Age-Hardening Stainless Steel Forgings |
A793 - 96(2009) | Standard Specification for Rolled Floor Plate, Stainless Steel |
A887 - 89(2009) | Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application |
A895 - 89(2009) | Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip |
A946 - 95(2004) | Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service |
A947M - 95(2004) | Standard Specification for Textured Stainless Steel Sheet [Metric] |
A959 - 11 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
A968 / A968M - 96(2009) | Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service |
A1010 / A1010M - 01(2009) | Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
A1028 - 03(2009) | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils |
A1069 / A1069M - 11 | Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes |
General Requirements
Designation | Title |
F906 - 85(2007) | Standard Specification for Letters and Numerals for Ships |
F956 - 91(2012) | Standard Specification for Bell, Cast, Sound Signalling |
F957 - 91(2012) | Standard Specification for Gong, Sound Signaling |
F1097 - 91(2012) | Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting) |
F1099M - 98(2011) | Standard Specification for Rat Guards, Ship's (Metric) |
F1138 - 98(2007) | Standard Specification for Spray Shields for Mechanical Joints |
F1145 - 05(2011) | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
F1166 - 07 | Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
F1179 - 88(2007) | Standard Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs |
F1182 - 07 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
F1270 - 97(2007) | Standard Practice for Preparing and Locating Emergency Muster Lists |
F1297 - 90(2012) | Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment |
F1312 - 90(2007) | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
F1332 - 99(2011) | Standard Practice for Use of SI (Metric) Units in Maritime Applications (Committee F25 Supplement to IEEE/ASTM SI 10) |
F1337 - 10 | Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities |
F1347 - 91(2012) | Standard Specification for Manually Operated Fueling Hose Reels |
F1348 / F1348M - 91(2007) | Standard Specification for Pneumatic Rotary Descaling Machines |
F1546 / F1546M - 96(2012) | Standard Specification for Fire Hose Nozzles |
F1547 - 09 | Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding |
F1808 - 03(2008) | Standard Guide for Weight Control Technical Requirements for Surface Ships |
F1994 - 99(2011) | Standard Test Method for Shipboard Fixed Foam Firefighting Systems |
F2016 - 00(2012) | Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings |
F2039 - 00(2012) | Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program |
F2192 - 05(2011) | Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders |
F2876 - 10 | Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications |
High Security Fences and Perimeter Barriers
Designation | Title |
F1712 - 11 | Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications |
F2548 - 12 | Standard Specification for Expanded Metal Fence Systems for Security Purposes |
F2611 - 11 | Standard Guide for Design and Construction of Chain Link Security Fencing |
F2780 - 09 | Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers |
F2781 - 10 | Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems |
F2814 - 09 | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes |
Insulation/Processes
Designation | Title |
F683 - 10 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
F2087 - 01(2007) | Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick |
F2133 - 01(2007) | Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Insulated Marine Bulkheads and Decks, Constructed of Steel |
F2154 - 01(2007) | Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
F2168 - 02(2008) | Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
F2191 - 02(2008) | Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
F2877 - 11e1 | Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum |
Machinery and Piping Systems
Designation | Title |
F681 - 82(2008) | Standard Practice for Use of Branch Connections |
F682 - 82a(2008) | Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings |
F704 - 81(2009) | Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints |
F707 / F707M - 94(2011) | Standard Specification for Modular Gage Boards |
F708 - 92(2008) | Standard Practice for Design and Installation of Rigid Pipe Hangers |
F721 - 81(2008) | Standard Specification for Gage Piping Assemblies |
F722 - 82(2008) | Standard Specification for Welded Joints for Shipboard Piping Systems |
F841 - 84(2011) | Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels |
F856 - 97(2008) | Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC) |
F885 - 84(2011) | Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS ¼ to 2 |
F986 - 86(2008) | Standard Specification for Suction Strainer Boxes |
F992 - 86(2011) | Standard Specification for Valve Label Plates |
F993 - 86(2011) | Standard Specification for Valve Locking Devices |
F994 - 86(2011) | Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections |
F998 - 12 | Standard Specification for Centrifugal Pump, Shipboard Use |
F1005 - 91(2007) | Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration |
F1006 - 86(2008) | Standard Specification for Entrainment Separators for Use in Marine Piping Applications |
F1007 - 86(2007) | Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application |
F1020 - 86(2011) | Standard Specification for Line-Blind Valves for Marine Applications |
F1030 - 86(2008) | Standard Practice for Selection of Valve Operators |
F1075 - 97(2008) | Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained |
F1076 - 87(2010) | Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
F1098 - 87(2010) | Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24 |
F1120 - 87(2010) | Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications |
F1121 - 87(2010) | Standard Specification for International Shore Connections for Marine Fire Applications |
F1122 - 04(2010) | Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller) |
F1123 - 87(2010) | Standard Specification for Non-Metallic Expansion Joints |
F1139 - 88(2010) | Standard Specification for Steam Traps and Drains |
F1155 - 10 | Standard Practice for Selection and Application of Piping System Materials |
F1172 - 88(2010) | Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type |
F1173 - 01(2006) | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
F1199 - 88(2010) | Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum) |
F1200 - 88(2010) | Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F) |
F1201 - 88(2010) | Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F |
F1245 - 89(2012) | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
F1271 - 90(2012) | Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
F1273 - 91(2007) | Standard Specification for Tank Vent Flame Arresters |
F1298 - 90(2012) | Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
F1311 - 90(2012) | Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges |
F1330 - 91(2012) | Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe |
F1333 - 91(2007) | Standard Specification for Construction of Fire and Foam Station Cabinets |
F1338 - 91(2007) | Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
F1370 - 92(2011) | Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard |
F1386 - 92(2010) | Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
F1387 - 99(2012) | Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings |
F1431 - 92(2010) | Standard Specification for Water Trap for Diesel Exhaust |
F1433 - 97(2010) | Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner |
F1476 - 07 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
F1508 - 96(2010) | Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services |
F1510 - 07 | Standard Specification for Rotary Positive Displacement Pumps, Ships Use |
F1511 - 11 | Standard Specification for Mechanical Seals for Shipboard Pump Applications |
F1548 - 01(2012) | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
F1565 - 00(2006) | Standard Specification for Pressure-Reducing Valves for Steam Service |
F1567 - 94(2006) | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
F1685 - 00(2006) | Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems |
F1718 - 01(2006) | Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps |
F1791 - 00(2006) | Standard Specification for Filters Used in Air or Nitrogen Systems |
F1792 - 97(2010) | Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service |
F1793 - 97(2010) | Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service |
F1794 - 97(2010) | Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems |
F1795 - 00(2006) | Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems |
F1985 - 99(2011) | Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves |
F2014 - 00(2006) | Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
F2015 - 00(2006) | Standard Specification for Lap Joint Flange Pipe End Applications |
F2798 - 09 | Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications |
F2934 - 12 | Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications |
Marine Environmental Protection
Designation | Title |
F1322 - 90(2009) | Standard Guide for Selection of Shipboard Incinerators |
F1323 - 08 | Standard Specification for Shipboard Incinerators |
F1799 - 97(2009) | Standard Guide for Shipboard Generated Waste Management Audits |
F1878 - 98(2009) | Standard Guide for Escort Vessel Evaluation and Selection |
F2283 - 12 | Standard Specification for Shipboard Oil Pollution Abatement System |
F2363 / F2363M - 12 | Standard Specification for Sewage and Graywater Flow Through Treatment Systems |
Mechanical and Chemical Testing and Processing Methods of Steel Products and Processes
Designation | Title |
A370 - 12 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
A751 - 11 | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products |
A991 / A991M - 10 | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products |
A1033 - 10 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations |
A1058 - 12a | Standard Test Methods for Mechanical Testing of Steel Products—Metric |
Methods of Corrosion Testing
Designation | Title |
A262 - 10 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
A380 - 06 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
A763 - 93(2009) | Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
A923 - 08 | Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels |
A967 - 05e2 | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts |
Methods of Testing
Designation | Title |
A90 / A90M - 11 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
A239 - 95(2009)e1 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
A309 - 01(2012) | Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test |
A428 / A428M - 10 | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles |
A754 / A754M - 11 | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
A1030 / A1030M - 11 | Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products |
A1073 / A1073M - 12 | Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet |
Other Fence Systems and Components
Designation | Title |
F537 - 01(2007) | Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials |
F2630 - 07 | Standard Guide for Self-Closing/Self-Latching General-Purpose Gates |
Outfitting and Deck Machinery
Designation | Title |
F670 - 02(2012) | Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing |
F765 - 93(2012)e1 | Standard Specification for Wildcats, Ship Anchor Chain |
F782 - 01(2012) | Standard Specification for Doors, Furniture, Marine |
F783 - 88(2008) | Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung |
F821 / F821M - 01(2012) | Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine |
F822 - 93(2010) | Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine |
F823 - 93(2010) | Standard Specification for Desk, Log, Marine, Steel, with Cabinet |
F824 - 93(2010) | Standard Specification for Tables, Mess, Marine, Steel |
F825 - 93(2010) | Standard Specification for Drawers, Furniture, Marine, Steel |
F826 - 94(2010) | Standard Specification for Tops, Furniture, Marine, Steel |
F985 - 00(2012) | Standard Specification for Panama Canal Pilot Platform |
F987 - 04(2010) | Standard Specification for Portable Intermediate Flush Deck Stanchion |
F1018 - 87a(2010) | Standard Specification for Steel Emergency Gear Stowage Locker |
F1019M - 00(2012) | Standard Specification for Steel Deck Gear Stowage Box [Metric] |
F1068 - 90(2012) | Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use |
F1069 - 87(2004) | Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use |
F1070 - 87(2004) | Standard Specification for Doors, Non-Tight, for Marine Use |
F1071 - 94(2012) | Standard Specification for Expanded-Metal Bulkhead Panels |
F1072 - 94(2012) | Standard Specification for Expanded-Metal Doors |
F1073 - 87(2012) | Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use |
F1074 - 87(2012) | Standard Specification for Cleats, Welded Horn Type |
F1085 - 10 | Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels |
F1092 - 04(2010) | Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems |
F1106 - 87(2012) | Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head) |
F1142 - 98(2012) | Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight |
F1143 - 98(2012) | Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight |
F1144 - 98(2012) | Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged |
F1196 - 00(2008) | Standard Specification for Sliding Watertight Door Assemblies |
F1197 - 00(2012) | Standard Specification for Sliding Watertight Door Control Systems |
F1244 - 08 | Standard Specification for Berths, Marine |
F1309 - 98(2012) | Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations |
F1331 - 91(2012) | Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces |
F1385 - 07(2012) | Standard Practice for Platforms in Cargo Tanks |
Rigid Polymer Fence Systems
Designation | Title |
F964 - 09 | Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing |
F1999 - 00(2006) | Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems |
Sheet Specifications
Designation | Title |
A308 / A308M - 10 | Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process |
A459 - 08 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape |
A463 / A463M - 10 | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
A653 / A653M - 11 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
A755 / A755M - 11 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
A792 / A792M - 10 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
A875 / A875M - 10 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
A879 / A879M - 12 | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
A917 - 08 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
A918 - 06(2011) | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
A924 / A924M - 10a | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
A929 / A929M - 01(2007) | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe |
A1003 / A1003M - 12 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
A1004 / A1004M - 99(2009) | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
A1046 / A1046M - 10ae1 | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process |
A1057 / A1057M - 08 | Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process |
A1063 / A1063M - 11a | Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process |
A1079 - 12 | Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
Specific Applications
Designation | Title |
F969 - 11 | Standard Practice for Construction of Chain-Link Tennis Court Fence |
F1908 - 08 | Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas |
F2000 - 10 | Standard Guide for Fences for Baseball and Softball Fields |
F2049 - 11 | Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas |
F2200 - 11b | Standard Specification for Automated Vehicular Gate Construction |
F2409 - 10 | Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas |
F2631 - 07 | Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities |
F2698 - 08 | Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities |
F2699 - 08 | Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas |
Stainless and Alloy Steel Tubular Products
Designation | Title |
A209 / A209M - 03(2007) | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
A213 / A213M - 11a | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
A249 / A249M - 10a | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A250 / A250M - 05(2009) | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes |
A268 / A268M - 10 | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service |
A269 - 10 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A270 / A270M - 10 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
A312 / A312M - 12 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A333 / A333M - 11 | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service |
A334 / A334M - 04a(2010) | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service |
A335 / A335M - 11 | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service |
A358 / A358M - 08a | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A369 / A369M - 11 | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service |
A376 / A376M - 12 | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service |
A409 / A409M - 09 | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
A511 / A511M - 12 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
A554 - 11 | Standard Specification for Welded Stainless Steel Mechanical Tubing |
A632 - 04(2009) | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service |
A688 / A688M - 12 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes |
A778 - 01(2009)e1 | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
A789 / A789M - 10a | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
A790 / A790M - 11 | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
A803 / A803M - 12 | Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes |
A813 / A813M - 09 | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
A814 / A814M - 08 | Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
A908 - 03(2008)e1 | Standard Specification for Stainless Steel Needle Tubing |
A928 / A928M - 11 | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal |
A943 / A943M - 01(2009) | Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes |
A949 / A949M - 01(2009) | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe |
A999 / A999M - 12 | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
A1012 - 10 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins |
A1015 - 01(2009) | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
A1016 / A1016M - 11a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
A1047 / A1047M - 05(2009) | Standard Test Method for Pneumatic Leak Testing of Tubing |
A1053 / A1053M - 11 | Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe |
Steel Chain
Designation | Title |
A391 / A391M - 07 | Standard Specification for Grade 80 Alloy Steel Chain |
A413 / A413M - 07 | Standard Specification for Carbon Steel Chain |
A466 / A466M - 07 | Standard Specification for Weldless Chain |
A467 / A467M - 07 | Standard Specification for Machine and Coil Chain |
A906 / A906M - 02(2010) | Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting |
A952 / A952M - 02(2010) | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links |
A973 / A973M - 07 | Standard Specification for Grade 100 Alloy Steel Chain |
Steel Forgings and Billets
Designation | Title |
A266 / A266M - 11 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components |
A275 / A275M - 08 | Standard Practice for Magnetic Particle Examination of Steel Forgings |
A288 - 91(2008) | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators |
A289 / A289M - 97(2008) | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators |
A290 / A290M - 05(2010) | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears |
A291 / A291M - 05(2010) | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears |
A336 / A336M - 10a | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts |
A372 / A372M - 10 | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels |
A388 / A388M - 11 | Standard Practice for Ultrasonic Examination of Steel Forgings |
A418 / A418M - 10 | Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings |
A427 / A427M - 10 | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction |
A456 / A456M - 08 | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings |
A469 / A469M - 07(2012) | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors |
A470 / A470M - 05(2010) | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts |
A471 / A471M - 09 | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels |
A472 / A472M - 07(2012) | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
A503 / A503M - 01(2011) | Standard Specification for Ultrasonic Examination of Forged Crankshafts |
A504 / A504M - 08 | Standard Specification for Wrought Carbon Steel Wheels |
A508 / A508M - 05b(2010) | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
A521 / A521M - 06(2011) | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use |
A531 / A531M - 12 | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
A541 / A541M - 05(2010) | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components |
A551 / A551M - 08 | Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications |
A579 / A579M - 04a(2009) | Standard Specification for Superstrength Alloy Steel Forgings |
A592 / A592M - 10 | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels |
A604 / A604M - 07(2012) | Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets |
A646 / A646M - 06(2011) | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings |
A649 / A649M - 10 | Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery |
A668 / A668M - 04(2009) | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
A711 / A711M - 07(2012) | Standard Specification for Steel Forging Stock |
A723 / A723M - 10 | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
A729 / A729M - 09e1 | Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service |
A745 / A745M - 12 | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
A765 / A765M - 07(2012) | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
A768 / A768M - 05(2010) | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
A788 / A788M - 11 | Standard Specification for Steel Forgings, General Requirements |
A833 - 08a | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
A837 / A837M - 06(2011) | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications |
A859 / A859M - 04(2009) | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
A891 / A891M - 10 | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels |
A909 / A909M - 06(2011) | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use |
A939 - 07(2012) | Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings |
A940 / A940M - 06(2011) | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors |
A956 - 06 | Standard Test Method for Leeb Hardness Testing of Steel Products |
A965 / A965M - 12 | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
A966 / A966M - 08(2012) | Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current |
A982 / A982M - 10 | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils |
A983 / A983M - 06(2011) | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines |
A986 / A986M - 01(2011) | Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings |
A1021 / A1021M - 05(2010) | Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service |
A1038 - 10a | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method |
A1048 / A1048M - 06(2011) | Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service |
A1049 / A1049M - 10 | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components |
Steel Forgings and Wrought Fittings for Piping Applications and Bolting Materials for Piping and Special Purpose Applications
Designation | Title |
A105 / A105M - 11a | Standard Specification for Carbon Steel Forgings for Piping Applications |
A181 / A181M - 12 | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping |
A182 / A182M - 12a | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
A193 / A193M - 12b | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications |
A194 / A194M - 12 | Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both |
A234 / A234M - 11a | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
A320 / A320M - 11a | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service |
A350 / A350M - 12 | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components |
A403 / A403M - 12 | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
A420 / A420M - 10a | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service |
A437 / A437M - 12 | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service |
A453 / A453M - 12 | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels |
A522 / A522M - 11 | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service |
A540 / A540M - 11 | Standard Specification for Alloy-Steel Bolting for Special Applications |
A694 / A694M - 08 | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
A707 / A707M - 10 | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
A727 / A727M - 11 | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
A758 / A758M - 10 | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
A774 / A774M - 09 | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
A815 / A815M - 10a | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
A836 / A836M - 02(2007) | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service |
A858 / A858M - 10a | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service |
A860 / A860M - 10 | Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings |
A960 / A960M - 10 | Standard Specification for Common Requirements for Wrought Steel Piping Fittings |
A961 / A961M - 12 | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications |
A962 / A962M - 12 | Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range |
A988 / A988M - 11 | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
A989 / A989M - 11 | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service |
A1014 / A1014M - 10 | Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service |
Steel Plates for Boilers and Pressure Vessels
Designation | Title |
A20 / A20M - 11 | Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
A203 / A203M - 12 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel |
A204 / A204M - 12 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
A225 / A225M - 12 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |
A263 - 09 | Standard Specification for Stainless Chromium Steel-Clad Plate |
A264 - 11 | Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate |
A265 - 09 | Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate |
A285 / A285M - 12 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength |
A299 / A299M - 09 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon |
A302 / A302M - 12 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
A353 / A353M - 09 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel |
A387 / A387M - 11 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum |
A435 / A435M - 90(2012) | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates |
A455 / A455M - 12 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese |
A515 / A515M - 10 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
A516 / A516M - 10 | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
A517 / A517M - 10 | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered |
A533 / A533M - 09e1 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
A537 / A537M - 08 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
A542 / A542M - 09 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium |
A543 / A543M - 09 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
A553 / A553M - 10 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel |
A562 / A562M - 10 | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings |
A577 / A577M - 90(2012) | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates |
A578 / A578M - 07(2012) | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications |
A612 / A612M - 12 | Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service |
A645 / A645M - 10 | Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated |
A662 / A662M - 12 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
A724 / A724M - 09 | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
A734 / A734M - 12 | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered |
A735 / A735M - 12 | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
A736 / A736M - 03(2007) | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
A737 / A737M - 09 | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
A738 / A738M - 12 | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
A770 / A770M - 03(2012) | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
A832 / A832M - 10 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
A841 / A841M - 03a(2007) | Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) |
A844 / A844M - 09 | Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process |
A1017 / A1017M - 11 | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
A1041 / A1041M - 04(2009) | Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten |
Steel Rails and Accessories
Designation | Title |
A1 - 00(2010) | Standard Specification for Carbon Steel Tee Rails |
A2 - 02(2008) | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types |
A3 - 01(2012) | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
A49 - 12 | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars |
A65 - 07 | Standard Specification for Steel Track Spikes |
A66 - 07 | Standard Specification for Steel Screw Spikes |
A67 - 00(2010) | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked |
A183 - 03(2009) | Standard Specification for Carbon Steel Track Bolts and Nuts |
A759 - 10 | Standard Specification for Carbon Steel Crane Rails |
Steel Reinforcement
Designation | Title |
A82 / A82M - 07 | Standard Specification for Steel Wire, Plain, for Concrete Reinforcement |
A184 / A184M - 06(2011) | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
A185 / A185M - 07 | Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
A416 / A416M - 12a | Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete |
A421 / A421M - 10 | Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete |
A496 / A496M - 07 | Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |
A497 / A497M - 07 | Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete |
A615 / A615M - 12 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
A648 - 12 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe |
A704 / A704M - 06(2011) | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
A706 / A706M - 09b | Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
A722 / A722M - 12 | Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete |
A767 / A767M - 09 | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
A775 / A775M - 07b | Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
A779 / A779M - 10 | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete |
A820 / A820M - 11 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
A821 / A821M - 10 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks |
A881 / A881M - 10 | Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties |
A882 / A882M - 04a(2010) | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand |
A884 / A884M - 12 | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement |
A886 / A886M - 10 | Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete |
A910 / A910M - 10 | Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete |
A911 / A911M - 11 | Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties |
A933 / A933M - 10 | Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement |
A934 / A934M - 07 | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars |
A944 - 10 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens |
A951 / A951M - 11 | Standard Specification for Steel Wire for Masonry Joint Reinforcement |
A955 / A955M - 12 | Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement |
A970 / A970M - 12 | Standard Specification for Headed Steel Bars for Concrete Reinforcement |
A981 / A981M - 11 | Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors |
A996 / A996M - 09b | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
A1022 / A1022M - 07 | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
A1032 - 04(2010) | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe |
A1034 / A1034M - 10a | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars |
A1035 / A1035M - 11 | Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement |
A1044 / A1044M - 05(2010) | Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete |
A1055 / A1055M - 10e1 | Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars |
A1060 / A1060M - 11e1 | Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete |
A1061 / A1061M - 09 | Standard Test Methods for Testing Multi-Wire Steel Strand |
A1064 / A1064M - 10e1 | Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete |
A1078 / A1078M - 12 | Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement |
Steel Rod and Wire
Designation | Title |
A227 / A227M - 06(2011) | Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs |
A228 / A228M - 07 | Standard Specification for Steel Wire, Music Spring Quality |
A229 / A229M - 12 | Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs |
A230 / A230M - 05(2011)e1 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
A231 / A231M - 10 | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire |
A232 / A232M - 05(2011)e1 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
A401 / A401M - 10 | Standard Specification for Steel Wire, Chromium-Silicon Alloy |
A407 - 07 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs |
A510 / A510M - 11 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
A679 / A679M - 06(2012) | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
A713 - 04(2010) | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
A853 - 04(2010) | Standard Specification for Steel Wire, Carbon, for General Use |
A877 / A877M - 10e1 | Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality |
A878 / A878M - 05(2011) | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality |
A899 - 91(2007) | Standard Specification for Steel Wire, Epoxy-Coated |
A905 - 04(2010) | Standard Specification for Steel Wire, Pressure Vessel Winding |
A931 - 08 | Standard Test Method for Tension Testing of Wire Ropes and Strand |
A938 - 07 | Standard Test Method for Torsion Testing of Wire |
A1000 / A1000M - 11 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
A1007 - 07 | Standard Specification for Carbon Steel Wire for Wire Rope |
A1023 / A1023M - 09e1 | Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes |
Steel Sheet and Strip
Designation | Title |
A109 / A109M - 08 | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
A414 / A414M - 10 | Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels |
A424 / A424M - 09a | Standard Specification for Steel, Sheet, for Porcelain Enameling |
A505 - 12 | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
A506 - 12 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
A507 - 12 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
A568 / A568M - 11b | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
A606 / A606M - 09a | Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance |
A635 / A635M - 09b | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
A659 / A659M - 12 | Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled |
A684 / A684M - 12 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
A749 / A749M - 08 | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
A794 / A794M - 12 | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled |
A805 / A805M - 09 | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
A980 / A980M - 11 | Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled |
A1008 / A1008M - 12 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable |
A1011 / A1011M - 12a | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
A1018 / A1018M - 10 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength |
A1031 / A1031M - 12 | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled |
A1039 / A1039M - 12 | Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process |
F1267 - 12 | Standard Specification for Metal, Expanded, Steel |
Structural Shapes and Hardware Specifications
Designation | Title |
A123 / A123M - 12 | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
A143 / A143M - 07 | Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement |
A153 / A153M - 09 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
A384 / A384M - 07 | Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies |
A385 / A385M - 11 | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) |
A780 / A780M - 09 | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
A896 / A896M - 09 | Standard Practice for Conducting Case Studies on Galvanized Structures |
A1059 / A1059M - 08 | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products |
A1068 - 10 | Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products |
A1072 / A1072M - 11 | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products |
A1074 - 11 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals |
Structural Steel for Bridges, Buildings, Rolling Stock and Ships
Designation | Title |
A6 / A6M - 12 | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
A36 / A36M - 08 | Standard Specification for Carbon Structural Steel |
A131 / A131M - 08 | Standard Specification for Structural Steel for Ships |
A242 / A242M - 04(2009) | Standard Specification for High-Strength Low-Alloy Structural Steel |
A283 / A283M - 12 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
A328 / A328M - 07(2012) | Standard Specification for Steel Sheet Piling |
A514 / A514M - 05(2009) | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
A529 / A529M - 05(2009) | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality |
A572 / A572M - 12 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
A573 / A573M - 05(2009) | Standard Specification for Structural Carbon Steel Plates of Improved Toughness |
A588 / A588M - 10 | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
A633 / A633M - 01(2011) | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates |
A656 / A656M - 12 | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability |
A673 / A673M - 07(2012) | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel |
A690 / A690M - 07(2012) | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments |
A709 / A709M - 11 | Standard Specification for Structural Steel for Bridges |
A710 / A710M - 02(2007) | Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
A769 / A769M - 05(2010) | Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes |
A786 / A786M - 05(2009) | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
A827 / A827M - 11 | Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications |
A829 / A829M - 11 | Standard Specification for Alloy Structural Steel Plates |
A830 / A830M - 11 | Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements |
A857 / A857M - 07 | Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage |
A871 / A871M - 12 | Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance |
A898 / A898M - 07(2012) | Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes |
A913 / A913M - 11 | Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process |
A945 / A945M - 06(2011) | Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness |
A950 / A950M - 11 | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling |
A992 / A992M - 11 | Standard Specification for Structural Steel Shapes |
A1043 / A1043M - 05(2009) | Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings |
A1066 / A1066M - 11 | Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP) |
A1077 / A1077M - 12 | Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings |
Structures
Designation | Title |
F718 - 07(2011)e1 | Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet |
F940 - 99(2009) | Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding |
F941 - 99(2009) | Standard Practice for Inspection of Marine Surface Preparation and Coating Application |
F991M - 04(2008) | Standard Specification for Docking/Drain Plug and Boss Assemblies [Metric] |
F1130 - 99(2009) | Standard Practice for Inspecting the Coating System of a Ship |
F1178 - 11 | Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture |
F1321 - 92(2008) | Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel |
F1455 - 92(2011) | Standard Guide for Selection of Structural Details for Ship Construction |
F2935 - 12 | Standard Specification for Chocks, Panama, Mooring Cast Steel |
F2936 - 12 | Standard Specification for Chocks, Ship Mooring, Cast Steel |
Terminology
Designation | Title |
A941 - 10a | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys |
Tin Mill Products
Designation | Title |
A599 / A599M - 07 | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet |
A623 - 11 | Standard Specification for Tin Mill Products, General Requirements |
A623M - 11 | Standard Specification for Tin Mill Products, General Requirements [Metric] |
A624 / A624M - 03(2008)e1 | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced |
A625 / A625M - 08 | Standard Specification for Tin Mill Products, Black Plate, Single-Reduced |
A626 / A626M - 03(2008)e1 | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced |
A630 - 03(2009) | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate |
A650 / A650M - 03(2008) | Standard Specification for Tin Mill Products, Black Plate, Double Reduced |
A657 / A657M - 03(2008)e1 | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced |
A987 / A987M - 09 | Standard Practice for Measuring Shape Characteristics of Tin Mill Products |
Tool Steels
Designation | Title |
A561 - 08 | Standard Practice for Macroetch Testing of Tool Steel Bars |
A597 - 87(2010) | Standard Specification for Cast Tool Steel |
A600 - 92a(2010) | Standard Specification for Tool Steel High Speed |
A681 - 08 | Standard Specification for Tool Steels Alloy |
A686 - 92(2010) | Standard Specification for Tool Steel, Carbon |
U.S. Government Requirements for Steel Mill and Foundry Products
Designation | Title |
A700 - 05 | Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
Wire Specifications
Designation | Title |
A111 - 99a(2009) | Standard Specification for Zinc-Coated (Galvanized) "Iron" Telephone and Telegraph Line Wire |
A116 - 11 | Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric |
A121 - 07 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
A363 - 03(2009)e1 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand |
A390 - 06(2011) | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
A411 - 08 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire |
A460 - 11 | Standard Specification for Copper-Clad Steel Wire Strand |
A474 - 03(2008) | Standard Specification for Aluminum-Coated Steel Wire Strand |
A475 - 03(2009)e1 | Standard Specification for Zinc-Coated Steel Wire Strand |
A586 - 04a(2009)e1 | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand |
A603 - 98(2009)e1 | Standard Specification for Zinc-Coated Steel Structural Wire Rope |
A640 - 97(2009)e1 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable |
A641 / A641M - 09a | Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire |
A740 - 98(2008) | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
A741 - 11e1 | Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail |
A764 - 07(2012) | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
A809 - 08 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
A810 - 01(2009)e1 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
A817 - 12 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
A818 - 06(2010) | Standard Specification for Coppered Carbon Steel Wire |
A854 / A854M - 08 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
A855 / A855M - 03(2009) | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand |
A856 / A856M - 03(2009) | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
A925 - 03(2009)e1 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand |
A974 - 97(2011) | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
A975 - 11 | Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) |
No comments:
Post a Comment